Skip to content
Yellow background with a white power symbol inside a sun icon and the text “7 Affordable and Clean Energy.” Represents the goal of promoting clean, reliable, and sustainable energy.
Orange background with three connected white building blocks and the text “9 Industry, Innovation and Infrastructure.” Represents the development of resilient infrastructure and sustainable industrialization.
Green background with a white eye shape containing the Earth, and the text “13 Climate Action.” Represents urgent action to combat climate change and its impacts.

A New PhD – Mohamed Ahmed Baba

Important | 2026-11-22

On October 29, 2026, Mohamed Baba, a doctoral student at Kaunas University of Technology, publicly defended his doctoral dissertation “Femtosecond Laser–induced Micro/Nanostructuring of Functional Materials for Applications in Solid Oxide Cells” in the field of Technological Sciences, Materials Engineering.

The dissertation investigated the application of femtosecond laser processing to tailor the functional properties of two important solid oxide cell (SOC) components: Ni–YSZ anode-supported membranes and Crofer 22 APU metallic interconnects. The research aimed to improve the electrochemical performance of solid oxide cells through laser micromachining of the anode support and to modify the surface properties of metallic interconnects through laser-induced periodic surface structures (LIPSS).

Femtosecond laser micromachining was employed to fabricate dense and sparse arrays of micro-holes in commercial Ni–YSZ anode-supported membranes. Both structures improved cell performance under solid oxide fuel cell (SOFC) and solid oxide electrolysis cell (SOEC) operating modes. In SOFC mode, the dense and sparse arrays increased cell performance by 25% and 11% in dry H2, respectively, and by 16% and 15.6% under humidified conditions (H2O = 50:50). In dry H2, the dense and sparse micro-hole arrays reduced the polarization resistance by 30.8% and 15.4%, respectively, while under H2:H2O (50:50) conditions, the reduction was approximately 20% for both structures.

In parallel, femtosecond laser-induced periodic surface structures were produced on Crofer 22 APU, a ferritic stainless steel used for metallic interconnects. The effects of laser-induced nanostructuring on surface morphology, roughness, wettability, surface chemistry, oxidation, and corrosion behavior were systematically investigated. The results demonstrated the ability of femtosecond laser processing to tailor the surface characteristics of Crofer 22 APU and established relationships between the induced surface structures and their functional properties under conditions relevant to solid oxide cell applications.

This research was conducted at Kaunas University of Technology under the supervision of Prof. Dr. Tomas Tamulevičius and in scientific collaboration with Gdańsk University of Technology and Warsaw University of Technology. The collaborative research contributed to the investigation of laser-structured functional materials and their electrochemical performance for solid oxide cell technologies.